RAN Technology

The Transistor


History and Humor 0 Comments 03/22/2021

A 1953 documentary by AT&T, anticipating the transistors coming impact on technology

Posted By: Robert Nickels (ranickels)
Post Date: 03/22/2021

Made between the 1947 invention of the transistor at Bell Labs and the 1956 awarding of the Nobel Prize for Physics to its creators, this documentary is less about the discovery itself than its anticipated impact on technology and society. The intent of the film was clearly to give the public of that era their first understanding of what a transistor was and why it mattered so much.

Made for a general audience, the film provides a clear and concise presentation on technological developments that began with the vacuum tube, showing different types of transistors and explaining the significance in their ultimate replacement of tubes. Included are visions of “things to come,” concepts and creations of how the small transistor might free up an encumbered world: the wrist radio, similar to Dick Tracy’s, but with a cool lapel sound speaker worn like a boutonniere; a portable TV set, which must have seemed astonishing at the time given the huge, heavy cabinetry required to accommodate the plethora of tubes inside 1950s TVs; and the “calculating machine,” or computer, whose size, we’re told, will one day be so reduced because of transistors that it will only require “a good-sized room” rather than a space the size of the Empire State Building.

The concept of how small computers could be still remained decades away. While The Transistor’s vision of the future seems somewhat quaint in retrospect, it captures a moment in time before the transistor became ubiquitous; a time when Bell Labs wanted the world to know that something important had occurred, something that was about to bring tremendous change to everyone’s daily lives.


  

Mystery Transmitter

where's the copper subchassis from?
Category: Vintage Ham Radio
 I didn't set out to buy this homebrew CW transmitter, it was included in an auction lot that I wanted so I had to take it to get the desired item.   But even though I always like to see good quality homebrew gear, this one is just a mystery.Most of the transmitter, including 6CL6 oscillator and buffer stages and a 6146 PA are built on a sub-chassis that is clearly part of a com...  READ MORE
- Robert Nickels (ranickels),  07/15/2021 
  

The Vector VR-50

last gasp from Swan/Atlas founder Herb Johnson
Category: Vintage Ham Radio
 Most hams are aware that Herb Johnson W6QKI founded Swan in Benson Arizona to make single-band SSB transceivers and then moved his operation to Oceanside CA where Swan thrived throughout the 1960s.   Swan merged with Cubic Corporation in 1967, and Johnson managed Swan as its subsidiary until 1973. Johnson founded Atlas Radio in 1974, with the assistance of Southcom International fo...  READ MORE
- Robert Nickels (ranickels),  07/12/2021 
   The Harvey-Wells Company was formed through a partnership between Clifford Harvey W1RF, and John Wells W1ZD in 1939.   Cliff Harvey had earlier founded Harvey Radio Labs in 1933, and prior to that, he was associated with the Hendricks and Harvey Company, another partnership. Producing police radios, transceivers, transmitters, and crystals. Their most popular product was the TBS-50 trans...  READ MORE
- Robert Nickels (ranickels),  06/18/2021 
    I became aware of a few hams playing with a thing designed to receive digital TV in Europe on your laptop - a little plug-in dongle that used an RTL-2832 IC and sold for $20 or so.    Some clever fellows had determined that it could be put into "radio mode" in which it would generate an IQ stream over USB, and by writing to control registers in the tuner IC, it could...  READ MORE
- Robert Nickels (ranickels),  06/13/2021 
    A while back I acquired a six channel HF transceiver made by the Radio Industries division of Hallicrafters, probably in the 1960s, called an SBT-20.    It is capable of 20 watts SSB or 5 watts AM (or CW with an optional board) in the range of 2-12 MHz and thus was probably aimed at commercial and light-duty military applications.   The radio could by ordered with fu...  READ MORE
- Robert Nickels (ranickels),  06/07/2021 
    I'm always thinking about interesting combinations of equipment to try out on the air.   One day while rearranging the shack I was getting ready to connect my Globe Scout Deluxe back up with a Collins 51S-1 receiver when the LED (the energy-efficient version of the old light bulb) came on.When I first started playing with DVB-T dongles back in 2012 I wanted an upconverter so I ...  READ MORE
- Robert Nickels (ranickels),  05/29/2021 
  

6AG7-6LG Novice Transmitter

Classic circuit with some modern twists
Category: Vintage Ham Radio
 There's a good chance that more homebrew ham transmitters have been built using a 6L6 than any other tube, and when combined with the superior performance of the 6AG7 oscillator, it's a hard combination to beat (click here for an explanation of the 6AG7's benefits)I'll be adding more info about this project soon, but one of my goals was to reproduce what was a budget-friendly...  READ MORE
- Robert Nickels (ranickels),  05/21/2021 
    All who operate AM in the midwest know and probably have talked to Masa, AB9MQ, who is a very active AM operator.    Having become interested in ham radio while still living in Japan in the early 1960s,  Masa's memories of the "dream rigs" is a bit differen than most US hams, and because the markets were still quite regional at the time, much of the ham gear...  READ MORE
- Robert Nickels (ranickels),  05/18/2021 
  

Hudson American Corporation

Manufacturer of marine radios in the 1940s
Category: Vintage Radio
 I enjoy playing with old marine radios that operated in the AM mode between 2-3 MHz.    This was the standard for "ship to shore" radio and telephone service from marine radio operators from after WWII until about 1970 when SSB was phased in and AM became obsolete.     Through this era a number of manufacturers were major players including RCA (Ra...  READ MORE
- Robert Nickels (ranickels),  05/02/2021 
    I've always thought that knurled aluminum knobs were a high-class option for radio gear, and while they are more durable than plastic they do accumulate tarnish, corrosion, and grunge from dirty fingers over the years and start to look poor.   Fortunately it is easy to restore them to a new attractive appearance using a bead blaster. Mine is a Harbor Freight floor-standing...  READ MORE
- Robert Nickels (ranickels),  04/29/2021 

VIEW Video Item

WRL Duo-Bander 84 demonstration

My demo of this innovative transceiver
VIEW Video Item

"Announcers Blues"

Paul Whiteman and his Orchestra
VIEW Video Item

JSB-20 Synthesizer demo

Tuning and USB/LSB selection

VIEW News Item

Announcing the W9DYV Radio Society

honoring SSB pioneer Wes Schum W9DYV
VIEW News Item

Hamfests Return!

A quick look at the Wauseon OH swap on June 6, 2020
VIEW News Item

Making A Transistor Radio

in memory of Rev. George Dobbs G3RJV (SK)
VIEW News Item

Soviet Spy Radio found in forest

(oh yeah, I put that there...I'll take it now thanks!)
VIEW News Item

Take the Boatanchor Survey!

Let authors and organizers know what you're interested in
VIEW News Item

W9RAN's "VERSA-TR" (as featured in Dec. 2018 QST)

A Versatile T/R solution for SDRs and vintage radios
VIEW News Item

MICROPHONIA! is here

Cool mics from my collection and ones I wish were